Marching along. As you can see, I advanced the piece on my rollers. Due to the orientation of my chair and frame stand, I’m most comfortable stitching in the lower third of the available area. Plus, being a new gizmo, I wanted to see how full slack, restacking the bars and tightening worked.
My working thread is marking the center point for the next band. That one will probably be in long armed cross stitch, worked both horizontal or vertical, and on the diagonal to create the foreground. Some museums call this “Punto Spina Pesce.” Modern stitchers probably know it better under the name Montenegrin stitch.
I’ve been having a lively discussion in another forum on useful needlework tools. In addition to the standards, I can offer up this:
Tweezers! Not just any dime store pair. I saw some specifically made for electronics assembly at work. They were so perfect, I went out and bought myself something similar. Electronics tweezers are long and pointy, with precision grip ends. The final half inch or so is nicely rounded, and is a good stand-in for a laying tool (for those who like the economy of a minimal tool set). Further up the shaft the profile switches to more of a D. On mine the 90-degree sides of the D are just sharp enough to cut through thread, so inserting the rounded end into a stitch and pushing ever so slightly will break the stitch without harming the ground cloth. Then the fine grip tweezers can be use to remove any thread detritus left over from ripping back. Electronics tweezers are available in many price ranges. Since nonmagnetic/non-conductive isn’t important for stitching, the least expensive pairs work just fine for my purposes.
I also made a blindingly obvious discovery about needles. I usually use fine tapestry style needles on ground cloth that’s 40+ threads per inch. But I often stitch those finer cloths with one strand of embroidery floss. One strand of floss has the annoying habit of falling out of the needle’s eye, something that drives me batty. But over the weekend I found these:
Ball point hand sewing needles, made for use on tricots and fine knit fabrics. You can see in the un-thumbnailed photo above that the eyes are tiny – just big enough for one strand of floss. The points are not quite as blunt as tapestry needles, but they are far less pointy than embroidery or plain-sewing sharps. They slide nicely between the threads of my ground cloth. And the small eye retains the single strand, reducing the time and annoyance of re-threading mid-work. Not orthodox perhaps, but effective.