REVERSING ENTROPY
All in all a hectic week, even for one with a snow day smack in the middle. Work deadlines aside (constant drumbeat that they are), our domestic plant experienced a bit more chaos than usual, with major appliances deciding in concert to abandon their prime functions. But we’ve now beaten back the forces of entropy and now can wash clothes on the premises again.
That being said, work does progress on the book collection. I now have about 27 plates (roughly 60 individual patterns) substantially drafted or in progress, along with a good start on the documentation that accompanies them. Also a start on the bibliography. My notes are far from exhausted, and there are lots more pages to go.
I also continue to playtest some of them. Here’s one I couldn’t resist. It’s from Plate 25 of my blackwork fillings collection. Work continues on that final PDF, too.
Even though this design is original and not sourced to a specific historical artifact, I think it would make a smashing all-over design for a coif or sweet bag. Especially if the little diamonds that surround the quatrefoil pomegranates were replaced by spangles. You can see the full effect in this larger rendition. The pattern collection’s thumbnail made it hard to see the whole design’s geometry.
Finally, in a new development, I’ve decided to give the blackwork fillings collection a name. I named my first book after the SCA group here in Boston, a group especially blessed with artists, artisans, researchers and folk who just plain enjoy hands-on exploration of the arts and sciences. The Barony of Carolingia is and ever will be my SCA “home.” But I did spend some time down in the Washington D.C. region, and promised my House Oldcastle friends down there that someday I’d write “Ensamplio Atlantaea” – a pattern collection named after Atlantia. the kingdom that includes the D.C. area. So the blackwork filling collection will come out under that name (provided it passes muster with my language maven pals).
And in the interests of continuity, the new book will be entitled “A Second Carolingian Modelbook.” That should make it easier to find for folk who found the first one to be useful.
PLEASE, MAKE IT STOP.
I think we’ve had about enough snow this winter…
WHAT MAKES A BLACKWORK PATTERN DIFFICULT?
Yaay! The first evidence of a project using fillings from my blackwork filling collection!
Kathy of Unbroken Thread is posting a series about her current blackwork project, a hearts and flowers theme. You can find her full archive of blackwork related posts here, including a nice piece on the minutae of setting up a project (something I habitually gloss over). Kudos to her! If you are working something using these patterns, I’d love to hear about it, and even to see it. If you give me permission I’ll post a photo of your piece in my gallery of stuff worked using my knitting and embroidery patterns.
Kathy’s latest post, referenced above, describes a mis-count and the subsequent unpicking. Her post made me think about what makes a specific pattern written for double running stitch (aka Spanish Stitch, punto scritto, Holbein Stitch) difficult to do.
Now some people say that large patterns are harder to stitch than small ones. That patterns like those on my current sampler are difficult. I say they’re not especially harder than small patterns. Accomplishing them is a matter of care and perseverence, but a the size of a large pattern doesn’t automatically make it difficult. To me, three things make a pattern difficult to stitch, the type of repeat, length of unadorned runs over bare ground, and the presence of off-count elements.
Eccentric “knight’s move” (multiple of X units over, X units up) type repeats require more attention on my part than do straight symmetrical repeats. Here’s a “knight’s move” repeat next to a symmetrical one:
The one on the left is a very simple pattern with a relatively simple skew, but even so, takes me far more concentration to work than does the seemingly more complex symmetrical pattern on the right.
I also find that long runs of straight stitches over bare ground – especially over diagonals – are a challenge. When I find a part of my design not aligning when my stitching roams back near an established area, it’s almost always because I messed up on one of the long runs. I suspect that historical stitchers had the same problem, and that’s why so many patterns feature little hatching type shading stitches or “hairs” that stick out from long straight lines – these being easier to count. The shading lines around the edges of the motifs in the design below (from my Clarkes Law sampler) are a good example. In addition to provding texture and the appearance of roundness, they make it FAR easier to keep on target:
Finally, off-count elements can drive me batty. This pattern is a particularly egregious example. Not only is it a knight’s move design, the skew-to-the-count little boxes where the four rotated squares meet can throw me off and make me forget where I am.
So thank you Kathy for posting your piece, and best wishes for project success!
HOW BIG IS BIG?
I’ve been working on the book, so my spare time is eaten long before I get around to posting here. There are now roughly 24 plate pages in process, either partially or fully complete and I’m working on the annotations.
In other progress news, I’m most of the way through this band:
Me-Zoe-You asked about the scale of the work, so included a penny and a standard foot long ruler. I’m working on a relatively coarse 36 count linen, at about 18 stitches per inch. The voided flowers in the current strip are slightly smaller than the penny. You can see that the four strips are each about a foot wide. This is going to be a BIG piece!
The cloth is quite a bit larger than the part shown – with enough room for four six-inch zones side by side. This pattern grouping occupies the centermost two. I’m not sure which pattern to do next. I’m also not sure if I’ll work the rest of the thing all in parallel, or if I’ll run some bands perpendicular to these. A couple of the patterns I’ve been playing with are so large that they’ll need two or perhaps all three sections to show their repeats.
Plus with symmetrical bands and no words on this one yet, there’s nothing so far that says which end is up. I still haven’t found a motto I want to enshrine in this piece. It may end up being mute. Suggestions are most welcome – especially secular, non-political, slightly geeky (yet pithy) sentiments that are not the sort of thing one would expect to see embroidered.
BLACK AND WHITE
Another band on my new blackwork sampler. This one is graphed from an artifact.
This one is graphed from an artifact. I’m using the same background fill and edging as the original, and I haven’t corrected the proportions. If I were to do so, the branch’s straight run at the top of the flower would have been worked one unit shorter, reducing the leggy leap from flower to descending sprout like thing. This one is in the new collection, with full source annotation.
To answer Anna from the Netherlands – I can’t say exactly when the book will be out. I will be self-publishing it through one of the various print-on-demand services. I wish I could work on it full time, but little things like earning a living have gotten in the way. I have about an hour each evening to research, graph, transcribe, write, and do lay-out. So I suspect that a final product won’t be ready before a year is out. Sorry to disappoint. You will however get to see a few of the patterns in it as I play test them on this sampler and post my progress. I won’t be able to do them all (there are lots) but you’ll see a few of my faves.
In terms of change in the pix and presentation here – I’ve upgraded blogging software and the camera. The new one is much higher resolution than the old, and I’m still figuring out how to work with it efficiently, and how to keep that odd moire like effect from obfuscating the weave of my ground cloth.
Finally, just for fun, here’s another snow shot from this week’s storm:
This isn’t the plow berm at the end of the driveway. It’s what happens when (at least) 22 inches of snow drifts. Smaller Daughter (about 5’4″ – 1.6m) shows off just one end of our excavation project. However Massachusetts doesn’t reel long from these things. School is back in session and everything’s narrower, but back to normal.
OUR NEW HOBBY!
Excavation!
Greetings from snowy Massachusetts.
GUEST OF HONOR
We’re slowly getting back to normal here at String Central, but I am still woefully behind on posts. The holidays were a bit squished due to work pressures, but fun none the less. Apologizing for tardiness, I present some highlights.
Here you can see the resident staff getting ready to welcome the guest of honor. This includes basic decorating:
Deploying the M&M army, provided over the years by Good Friend Jean:
And finally welcoming Gaston, who came to dine with us:
Or rather, whom we came to dine upon. Here’s another glamor shot:
Gaston was slow-roasted very simply, with sage, onion and apple inside for flavor. I can say he was simply delicious, served with creamed onions and celery, plus red rice with wild mushrooms. We picked him up, dressed from Savenor’s in Cambridge on Thursday, then brined him in cider for a day before he went into the oven for dinner on Christmas Eve. Over the course of the week we consumed him entirely, saving hocks, extra skin, and bones for bean pots to come, and making a terrific terrine out of the liver. We will miss Gaston, but we’re very happy that our paths crossed.
Speaking of happy, the usual holiday triumphs also occurred:
Every girl should have a gift pile that includes jewelry, fun clothes, books, games, and own physics discovery set. The kids are now thoroughly spoiled by family, friends, and their parents alike.
All in all a good holiday!
String-Or-Nothing 