Thanks, all for the kind reaction to the last post in this omnibus series. Thus emboldened, I blather on.
The New Carolingian Modelbook came out in 1995. As mentioned before, it started as my working notebook collections of designs redacted from book photos, microfilms of early modelbooks, and sketches of artifacts, then grew from there. Although it was well received, I didn’t get much recompense for my 13 years of work – the publisher only paid royalties on the first 250 books out of 2,000, and ran off with the rest. But I didn’t stop collecting patterns. As originals and artifact photos became increasingly accessible, I kept at it, trying to transcribe designs, norm repeats (artifacts rarely are stitch perfect, and often need to be averaged out – blending all variants and mistakes into one representation), and most of all – collect specific citations and links. This material is the core of my ever-forthcoming The Second Carolingian Modelbook. And along the way, starting around 2010, I couldn’t resist trying out what I had found.
We left off last in the 1990s at the start of my blogging career, so my projects are a bit better documented. As before, I zigzagged between knitting, crochet. I tended to knit more around the time my two spawn were born, and for a while thereafter, and then return to stitching when they were around kindergarten age. For most of the early 2000s I was consumed by knitting and with running the wiseNeedle website with its collection of crowd-sourced yarn reviews. But eventually I began stitching again.
Elder Daughter went off to college in 2009, equipped with this bit of parental nagging. It is about 14.5 x 18 inches, worked on 30 count linen in Danish Flower Thread. Note the debut of the little skull and bones hiding amid the flowers from my Buttery interlace. The graph for the center phoenix is also here.
Lessons Learned: Around the time this was done with the help of Elder Daughter and others, I had figured out a new software solution for linear graphing because the method used for the phoenix wasn’t suitable for publication, and the hardware/software used for my previous work was now obsolete/unavailable. I started consolidating my doodles from various notebooks, backs of envelopes, and marginalia to better learn the methods and quirks of my GIMP-based custom drafting solution. Those experimental notes are what became Ensamplario Atlantio, and all graphs/charts I’ve done since have used the GIMP drafting method.
Fresh off the last piece I still had the itch to stitch. I did this part in homage to the Hitchikers’ Guide, part as appropriate decor for my office workspace (by trade I’m a proposal manager in high tech – deadlines and panic are my stock in trade). And possibly part because as parent of a new college student let loose on the world, I needed reassurance. It’s about 8 inches across, and was done in DMC cotton floss on 32 count cotton/linen blend. The bead border chart has been up on String for a long time, but I’ve also recently released a free full-graph pattern for this piece. Enjoy!
Lessons Learned: I was still experimenting with graphing out the lettered part ahead of time. Previously I had just guessed. This was also the first piece with a border I started in the corners rather than at the center, so that any “fudging” could happen in the center. While the north south bits of the frame worked out evenly, you can see the improvised bar in the center I inserted when it became clear that my bead repeat would not fit. And I bet you would never have noticed it if I hadn’t pointed it out.
Continuing the SF theme into 2010, I did this piece, featuring a quotation from noted author Arthur C. Clarke. It’s the first one to have designs from The Second Carolingian Modelbook (T2CM) on it, along with patterns from my earlier books. The new bits include all the full width designs between “ADVANCED” and the adaptation of Bostocke’s strawberries at the bottom. The narrow bands left and right of the wreath and column are a mix of older and newer designs. This one also hangs in my workspace now, to the confusion of my (mostly non-SF loving) coworkers.
Lessons Learned: I had a lot of fun with this one. I played with multiple thicknesses of thread and density of design, along with the two colors, and enjoyed balancing the effects that could be achieved with that limited group of variables. The strips are a mix of one and two strands of standard DMC floss. The solid ground voided strips are all in LACS, as is the foreground stitched daSera repeat from TNCM at the very top. I was particularly pleased with the hops panel shown in the detail. The design was done in two strands, but the (non historical) ground behind it – the diagonals worked mirrored – was done in single strand.
By 2012 I was full throttle on pulling together a sequel to TNCM. Drafting and writing for The Second Carolingian Modelbook (T2CM) was off and running. And of course I had to playtest the designs as I went along. Most of these (with three exceptions I worked from Lipperheide) are in the sequel. The big black sampler is done in silk on 36 count linen. The stitching area is about 24 inches across. Understandably it took me about 13 months to finish, and will be on the cover of T2CM. It was an eventful year, that included Younger Spawn’s appendix adventure, and the demise of my all-volunteer wiseNeedle independent website, out-competed by Ravelry and other paid-advertiser info sources.
No new stitches to speak of in this one but I did use long armed cross stitch on the panel at the very bottom, the oak leaf and acorn bit, and in the spot fillings for the “beads” in the wide meander just below the lion/dragon beastie. The texture it produces when massed has a very plaited appearance compared to plain old cross stitch.
Lessons Learned: Composition and balance work better if you impose a tiny bit of order on the chaos. I basted in several guidelines, dividing my total piece up into several zones. Although I picked them on the fly with no real advance planning, worked my individual panels and strips inside those zones, making sure to ground the piece at the top, bottom, left and right with darker, denser designs.
2012 marked the start of Big Green, done in silk on 50 count linen. Unlike the ones above, he is still unfinished. The designs on this one are entirely from T2CM. I WILL go back and finish this piece, but other things have gotten in the way. I took it with us for our sojurn in India, but between the heat and lack of a good spot to sit and stitch, I never got much further on it. Also the meshy technique is amazingly time consuming. One two-hour evening will produce a patch about the size of a quarter. One thing to note about the meshy stitch – I now know why it has survived on so many pieces even when the surrounding linen is long gone. It’s amazingly dense, near indestructible, and I can say truthfully – impossible to pick out. By contrast surface voided work is fragile, catching and degrading with abrasion, washing and wear.
Lessons Learned: I have been using this piece to experiment with stitching techniques. The interlace (first detail) uses Montenegrin Stitch. The straight runs were pretty easy, but without the most excellent Autopsy of the Montenegrin Stitch by Amy Mitten, the bendy bits would have driven me insane to figure out. And the big voided repeat where I stalled out (a stitching family I’ve nicknamed “The Lettuce Repeat”) is done in the tightly pulled meshy technique so common among voided artifacts. I had first tried out a different pulled thread technique for the topmost design, but the effect was nowhere near that of the historical pieces. But at maximum tension Italian Four Sided Stitch, based on the technique in Christie’s Samplers and Stitches (1920) was spot on. But it has to be done in silk because cotton isn’t strong enough to stand up to the force required to achieve the solid mesh. (My previous reference to the stitch was based on another edition of Christie’s work, now no longer accessible on line). And it’s (relatively) easy to hide ends while working it – burying them in spots that will be totally overworked later.
That 2013/2014 stay in India necessitated a scouting run to find housing and schools in May of 2012. I needed something small and portable to do on that trip, so the first two book covers were born. I worked these from T2CM patterns on 30 count linen/cotton blend, using DMC floss. They were small Moleskine-look-alikes, and were donated to the SCA East Kingdom’s largess program, to be given as small gifts by the seated royalty. Although I put notes in each one hoping that the recipients would get in touch, I have no idea where these ended up. Still, they were quick stitch pieces and fun.
Lessons Learned: While I have always known that stitching is a wonderful icebreaker, especially during International travel, at this point I had no idea that Kasuthi existed. It’s a traditional Indian stitching style and very close cousin to Blackwork’s precursors. A lady in Mumbai airport remarked on the black and red book and asked where I had learned to do it. That sparked yet another flurry of research.
Most of my production in India was knitted, largely lacy pieces. I did a couple of test knits of pieces designed by the generous and well-followed MMario, now of blessed memory, and a couple of other bits of my own design. I had many knitpals in Pune, whom I had “met” via Ravelry prior to our arrival. That kept me more or less in that craft, but I did do some small excursions into stitching. One was the red Ganesh cloth, above. I stitched it in 2013 as a new-house gift for the parents of our driver, Rupesh. I do hope it has brought the family the intended luck. This one is pretty well documented here on String, including the source of the outlines and Ensamplario Atlantio fill numbers for all of the motifs I used. It’s done on a not-so-even weave 32 count cotton/linen blend, in DMC floss.
Lessons Learned: The Italian hem stitching I used to finish off the cloth neatly actually took more time to do than Lord Ganesh himself. But I liked it, and filed that family of stitching away for future reference. Someday.
In 2013 I tried my hand at Kasuthi. This little motif is a traditional one, and is worked entirely in double sided double running stitch. It’s on a relatively coarse 28 count cotton, also in DMC floss. My main reference for Kasuthi was Karnataki Kashida by Anita Chawadapurkar and Menaka Prakashan. It’s in Marathi, but friends helped out by reading bits to me in translation. Here’s a post I did on the style.
Lessons Learned: I had originally intended on making a set of napkins, but when I washed this piece, the oh so carefully ended off threads, so well buried and invisible here, did fluff up a bit. So I scotched that idea.
Also in India, just before we left in 2014, I started this piece, with the intent to make a pouch for my stitching tools. The cloth is a standard linen dish towel, bought at a local supermarket. The thread is also linen. It remains unfinished.
Lessons Learned: While this ground started out as a very stitch-able 32 count more or less even weave, tossing it in the washing machine shrank it in unexpected ways. The threads in one direction ended up being about 30 across. Those in the other direction ended up something closer to 42, so the dimensions of the thing deformed. But undaunted I tried to stitch anyway, working over 2×3 threads. But the smaller threads were very hard to see, and the linen thread frayed beyond belief (this was before I learned to use beeswax). It sits in my Chest of Stitching Horrors(tm), never to be completed.
This takes me up to around the time we returned from India, in 2014. And I’m not done yet. If interest has continued, I will do one more of these, to finish out up to the most current things on my frames.