LATEST INTERLACE AND BUTTERY PATTERN
Here’s what that little red scrap at the center top of the last post’s picture has grown to:
To be fair, this all hasn’t happened since the last post. I took that picture a couple of days before I wrote the blog entry.
This is another panel from TNCM, Plate 32:1. It’s a long repeat with two reflection points. This scrap is the center of one of them. As you can see the pattern will mirror image left and right along the centermost line of the stem interlace. There’s another totally different bounce line that will just make it onto this cloth, but the repeat on the other side of it won’t be full cycle. I really like these extra long repeats, but they’re hard to use for most modern work unless one is doing a whole length of bed linen, or wishes to stitch at gauges much smaller than most modern embroiderers attempt. The longitudinal repeat for this pattern for example is 257 units. On 14 count Aida for example, 257 stitches works out to a strip that’s 18 inches long, and that’s just for one repeat. I’m not much better here, stitching as I am on quite coarse 36 count linen. My repeat will be about 14 inches across, just a little bit narrower than the width of my stitched area. For the record though, this isn’t the longest repeat I’ve got in TNCM. That one is 308 units, and is the one I want to use on my notional library curtains. Someday.
In other embroidery related news, I had forgotten that I had given my pals at the Buttery permission to post my original line unit pattern named after their house. Please respect my copyright though and don’t repost the page.
Also the pattern in TNCM and available at the Buttery link above shows only a bit more than half of the fillings I worked in the swatch above. The new ones I doodled up specifically for the Do Right sampler.
ADDING ON
At the risk of further boring what few readers remain here, I present more progress on my Clarke’s Law sampler:
I’ve finished off the two bands of lettering north and south of my first voided strip, and have started on the foreground stitched panel that will be the one at the top of the finished piece. I’m using yet another pattern from TNCM. This one is on Plate 31:1, and reproduces a pattern by my favorite modelbook publisher – Domenico da Sera, from a work of his dating to 1546. The original is shown in a manner that implies working the background, which I replicated in my book, but for this piece I’m stitching the foreground instead. I’m also using long armed cross stitch for this panel, not plain old cross stitch. I’m doing it the easy way though. Instead of bending the path of the stitching up to follow the course of the diagonal stems, I’m just marching across in horizontal bands, worked back and forth with each row alternating direction. This emphasizes the plaited texture more than does working all of the rows of stitching in the same direction, a detail that I like but some others don’t. Some folk prefer a smoother top-leg-uniform result, and use a different stitching logic altogether. Also nice, but I prefer the complexity of the herringbone family long-arm cross stitch more.
The current band should take me about two or three weeks to finish – work deadlines willing. Then I’ll begin the band below the *LY ADVANCED TE* segment. That one will be another line unit pattern rather than a solid block unit pattern, quite probably one of the ones I’ve been storing up post-TNCM against my mythical second book.
LETTER BY LETTER
It must be exquisitely boring especially for knitters to tune in here and see slug like incremental progress on a non-knitting project. Even so, I ooze along:
I also note that this style of embroidery on the count doesn’t seem to be very popular right now, at least not among web-connected stitchers. I’ve been web-walking for a couple of days now, looking for inspiration to share, but found very little contemporary work, although I did find the historical artifact photos cited in my last post. I guess I’m just programmed to be doing something different – knitting before it became a fad, crocheting when everyone else was doing needlepoint, and am now off stitching obscure styles.
There are a few folk connected with the SCA with work or research that piques my interest and who readers here may find inspiring, too:
- Extreme Costuming’s gallery of impressive stitched pieces. Lovely, with lots of infillings or background voiding, but not exactly what I was looking for.
- ElizabethanGeek’s blackworked smock is also quite charming.
- Here’s a historical example (rather than a contemporary work) from an SCA affiliated researcher – a pair of impressive Italian woman’s breeches (an undergarment, really) from the mid to late 1600s, accompanied by a chart for the stitching pattern used. (Other items at the Realm of Venus website are very interesting, too – especially the embroidered shifts).
If you know of any pix of long-repeat works on the count, either voided (background filled) or stitched foreground, in monochrome or mixed colors – based on historical patterns or original – please feel free to post the links to them here in the comments so we can all oooh and aaaahhh.
Finally, if there’s enough interest, I’ll share some graphs of future pattern panels here, that aren’t available in TNCM.
NOT QUITE SUFFICIENT
More progress on my latest sampler. As you can see, “sufficiently” doesn’t fit on one row. No problem. the “ly” will begin the row of lettering below the grape pattern. I intend on marking word breaks with the little red oval anyway. I’ll probably go back and fill in the small slice of space after the final T on the first row with an all black bit of patterning after all of the words are done.
For those who are keeping track, the quotation is “Any sufficiently advanced technology is indistinguishable from magic.”
I’m planning my next non-letter strips – a rather dark one immediately above the existing top line of lettering, and something rather more narrow but probably not as dark below the just-begun row of lettering. I’m looking at both line unit and solid unit patterns, plus voided work and other forms of counted thread stitching. The more complex, the better of course, just to underscore the irony of using “old tech” to depict this particular thought. Among the sources I’m using are my own book, plus notes for my theoretical next one, and some on-line photos of voided work on display at the Victoria & Albert Museum. (The cited photo set was provided by the unknown keeper of the Drakt.org website. Thank you, unknown keeper!)
PROGRESS!
As you can see, my voided grape strip is complete, and I’ve begun some of the lettering.
I’m using an embellished alphabet from Sajou #55, by way of Ramzi’s Patternmaker Charts website. Just to make life interesting, I’m working the tendrils that twine around the base letter forms in my crimson, and the letters themselves in black.
My plans are to march the letters across the piece, truncating words willy-nilly at the rightmost edge if they don’t fit, then continuing them on the next strip of lettering. For example, I will probably run out of room for the rest of “Sufficiently” before I get to my right hand margin, but I will finish out the word on the next line immediately below the grape panel. Words will be divided by little red ovals, as seen above between “Any” and the start of “Sufficiently.” I also intend to alternate patterned panels with letter bearing strips.
I like the way this is maturing. Now just to keep at it, both planning and execution, until all is done.
VINING ALONG
Yes, with all the cookie baking some embroidery did get done:
Here you see the first strip pattern, further along than the last stitching-related post. But not too far. Time is after all a finite commodity.
I’m a bit over half done with this particular strip. The grape unit to the right in this picture is the center one, and will be complete. There will be another partial unit of the same size as the truncated right hand unit on the left.
I’m thinking of working the words in black, perhaps using more than one of the various vintage alphabets from Ramzi’s Patternmakercharts website. I’m thinking about several presentations for them, including doing each word in a different face, so that the final presentation looks a bit like a ransom note; or working each initial letter in one of the more demonstrative faces, but the rest of the letters in another simpler or lower case face; or working each line in a single face, but no two lines the same. I’m not sure yet what I’ll be doing, but there’s lots more grape leaf panel to stitch as I contemplate the problem.
MORE GRAPES
“Go back to knitting!” Sorry. I’ve got the stitching bug now and I go where my fingers lead me.
Minor progress on the latest sampler – another panel from TNCM. This one I decided to do voided style (the original had no background). Instead of using cross stitch or long-armed cross stitch for the fill, I’ve opted to do a grid like mesh, worked in one strand of the same DMC floss that I’m using for the two-strand outlines. I’m not sure how I’ll handle the top and bottom. I’m thinking of being non-traditional, and instead of extending the fill a couple of units past the design’s base area, terminating it a unit or two inside the design, so that the grapes “overflow” their background.
The next decision is whether or not to continue this entirely across the cloth, or apportion my space differently. The piece of linen I’m using is rather large and long. I may decide to just go horizon to horizon, with no outer framing edging, and insert the lines of my quotation in between a series of strip patterns of various types. If so – do I use the same typeface for all of the words, or do I use different ones for each line. Decisions, decisions…
FULL THROATED PANIC
All the stitching on Don’t Panic is done! It now goes into the “finish me later” pile. This one will be framed, with a mitered fabric border all the way around. Not sure what color for the edging yet, but I’ll go for complementing rather than matching the deep green thread:
To answer a question, it’s about 8 inches across from border to border.
But I’m still not stitched out. The next one is the Clarke’s Third Law sampler. This one will be a large filled cloth, covered with various patterns in my usual haphazard style, probably a bit less symmetrical than the Do Right piece. I’m thinking that the saying will meander among the patterns rather than being rigidly confined to horizontal rows. It’s on a finer count linen than Panic, stitched with two strands of standard DMC floss. I present the very larval beginning:
It’s yet another strip pattern from TNCM, this one of grapes (Hi, Katheryn!). No, beyond folding the cloth in half to determine a rough center, I have not established a size, alignment lines, border areas, or done any other planning whatsoever. (Purists who baste in their center grids and edges are shuddering in horror right now.) I haven’t even decided whether the final piece will be displayed in portrait or landscape orientation. It will be an adventure.
In other news, in spite of another spate of horror deadlines looming from now to mid January, splatting directly on what was to have been a week off from work, I have started holiday cookie prep. Long time readers here know I aim for 10 types each December, to satisfy the family’s desire for lots of variety and to have plenty to give to family, friends, and co-workers.
This year’s line-up includes the traditional faves, plus a couple of new items. The standards making their annual appearance are chocolate chips, pecan sandies, peanut butter, Buffalo rum balls (so called because my ancient recipe copy is noted as being from the Buffalo Evening News, sometime in the 1960s), earthquakes (very similar to these chocolate crinkles), sugar cookie cut-outs (standard Joy of Cooking recipe, this year with new snowflake cutters), and oysters. Linzer cookies are making an encore appearance, too. The new ones are rolled gingersnaps (using an odd European cookie roller) and date nut rolls (from Tatte Bakery in Brookline, as published in the Boston Globe). Also back by popular demand is the panforte I’ve made before. Oh. And fudge to use up leftover chocolate and nuts. I can hear Elder Daughter hyperventilating over this, all the way from her dorm…
This weekend we baked the two items that improve with age – the rum balls that need to cure to lose that raw rum edge, and the panforte because we’re soaking it in Calvados this year. The others will follow, with the longer keepers like peanut butter being done first, and the tender ones that go stale quickly last (Linzers and the date nut roll). I try to have all baked by the weekend before the holiday. Deadlines willing.
And not to forget this week’s holiday:
Happy Latkes to everyone!
STILL NOT IN A PANIC
How did that challenge at the center of the horizontal bead strip play out? The little red arrow shows:
I ended up two units off repeat, which allowed me only enough room to make a narrow vertical bar. Had the area been wider, I might have done something else. But it worked out just fine as it is. The pattern for the bead border is here in yesterday’s post.
I’ll be done with this one before the weekend is over, provided no crises intrude. Then it’s on to the Clarke’s Third Law sampler. Even with request and gift knitting piling up, I still don’t have stitching out of my system.
PANIC BUTTONS
UPDATE: THE BORDER DESIGN BELOW HAS BEEN ADDED TO THE PDF COLLECTION AT THE EMBROIDERY PATTERNS LINK, ABOVE.
Well, I’ve decided to do a border around Don’t Panic. Again it’s one from TNCM, or rather, two that are presented together in the book. The first one is a very narrow geometric strip, the second is a bead (I think it looks like a march of panic buttons). The pattern is one of my originals, heavily inspired by historical sources, but not a literal transcription of any one design. The book doesn’t present a corner, but in this pattern one is very easy to improvise.
As an early holiday present, I share it and the corner elaboration here:
The astute will note that the repeats of the strip edging and the bead unit are different, and that a span of this pattern will not necessarily work out even, with all four corners identical. Because the step strip edging is so narrow this isn’t a problem. It looks fine ending it at the squared off corner with either the little L unit shown above, or truncating it one step earlier so that there is a little square next to the larger corner block (shown on the photo above, in the upper left corner). The key is to make both ends that terminate at the corner block the same so that each corner displays logical consistency. The four actual corners of the work are so far apart that any minor difference in the strip among them won’t be noticed.
It is however important to keep the bead units as near complete as possible. My north-south border strip works out to be an exact multiple of my repeat. You can see the happy march of whole bead units on the right. But what about the longer east-west panels?
I suppose I could be **perfect** and count them out, or plot the whole thing on graph paper first. But I’m a leap-off-the-pier problem solver. My solution is to work an even number of beads on each side, starting at the east and west corners. When the two sets met in the center if the count is off, I’ll either work a centered elongated bead, or I’ll figure out some other bit of complimenting ornament to fill the center space. I might for example choose the centers to sign and date the work.
The narrow strip then presents its own problems. I’ve established the repeat sequence on the right hand side. If I were to start it again from the left, I might run into a similar conundrum in its center. Instead, once I handle the bead problem I’ll continue working the narrow step strip from left to right, letting it end wherever it chooses to at my upper right hand corner. I might have to pick out the little bit of vertical strip already worked at the inner left so I can make it match the horizontal where both strips abut the box corner, but that’s life.
String-Or-Nothing 
